#par-9776
#par-9771

1 tonne of cullet saves 1.2 tonnes of raw materials. Cullet allows to save a significant amount of melting energy. An increase with 10% more cullet means saving 2,5% of energy consumption. That means a strong decrease of CO2 emission is possible thanks to cullet recycling. Recycling of 1 tonne of cullet allows to avoid the emission of 700 kg of CO2.

The average cullet ratio in our raw materials is close to 30% today, but this will be increased significantly.

 

#par-9676

AGC Glass Europe recycles around 1,000,000 tonnes of cullet per year, saving about 1,150,000 tonnes of raw material and 700,000 tonnes of CO2 emissions.

#par-9786
#par-9781

 

Closed loop recycling

To achieve the objectives for flat glass in a climate-neutral Europe, a greater input of cullet is identified as one of the major routes to reduce CO2 emissions from manufacturing. 
It is therefore in our, and in the common interest of the flat glass industry, that an increased quantity of cullet returns to the flat glass industry in a closed-loop model, i.e. ‘flat glass to flat glass’.
The sector sets the goal to promote close loop “flat glass to flat glass recycling” and no other forms of recycling (to other glass sectors) or downcycling. Secondly, the stakes are around the availability / quantity of cullet. The issue of cullet specifications is left aside because any cullet collection must be of a certain quality to ensure a closed loop recycling is made possible.

#par-1911
#par-3596

Three routes of recycling flat glass cullet

In cullet we distinguish 3 types of routes: internal cullet (cullet at the glass production site), Pre-consumer cullet (cullet occurring at customers’ sites during glass processing) and End-of-Life cullet (cullet generated at the end of life of the glazing product)

There is an estimated +/-5 Mt of flat glass cullet available annually in the EU. The flat glass sector stands ready to use the available cullet, if uncontaminated, to further sustain its production, and reduce CO2 emissions from manufacturing.

Flat glass cullet in EU

 

 

 

 

 

 

 

 

 

 

AGC is actively involved in several projects to improve collection and reuse of cullet in our plants, such as:

  • redefining the flows of cullet in order to reduce transport distances between the source, the recycler and the float plants,
  • teaching our people to sort the cullet efficiently to recycle it better,
  • increasing the range of materials that we can load into our furnaces.

However, the cullet used in our own production process must meet stringent specifications, and so we also actively seek out alternative routes for cullet that we cannot recycle in our own products. 
Today the clean cullet that can be used in float glass furnaces represents only 8.5 per cent* of all the cullet collected after the use phase of existing glass because we need to know the exact composition of the cullet and make sure it is uncontaminated,  that means not mixed with other materials.

#par-9796
#par-9791

The challenge of collecting End-of-Life flat glass

When it comes to end-of-life glass stream, there is a difference between cullet from automotive glazing and from building glass. Within building glass, there is a difference between commercial, and residential glazing.

With the renovation wave of buildings at hand, a huge potential of cullet volumes sits in existing buildings

 

#par-9801

To increase the use of post-consumer cullet, more Extended Producer Responsibility (EPR) Schemes are to be set up to assure the dismantling, collection, and recycling, particularly for building glass.

#par-9811
#par-9806

 

In the Netherlands AGC helped to develop a national system of collection of flat glass from construction and demolition waste. Vlakglas Recycling Nederland (VRN) makes sure flat glass containers are available across the country to collect cullet. The system is financed through a tax on every m2 of insulated glass produced or imported in the Netherlands. 
Cullet output is then sold by VRN. Initially main clients were glass container, glass wool and glass treatment companies. New agreements have been put in place to sell greater quantities to flat glass manufacturers. This cullet is now also sold to AGC furnaces.. 
However, a great part is not clean enough for float production and is reused in other glass production (for bottles, fiberglass, foam glass, etc.), but there are many other potential uses such as reflective road surfacing, golf bunker sand, aquarium ornamentation, water filtration systems, construction aggregates.

#par-10881
#par-10871

 

Recycle Glass is AGC's service of collecting flat glass wastes from industrial losses and from renovation or deconstruction projects (end of life glazing) in the scope to be recycled in flat glass production. For end-of-life glazing, AGC works with a partner network to guarantee that the cullet is of sufficient quality for circular loop recycling. 

  • First, the window is removed from the facade and the frame is dismantled by the deconstruction company or the window installer. The glazing is collected in a dedicated container provided by AGC partners. 
  • The container is then transported to a selected flat glass recycler to process the glazing in order to extract the cullet, meeting the quality specifications for the production of flat glass. 
  • Finally, the cullet is transported to one of our closest flat glass production plants to be melted in the glass furnace. 

Using more recycled glass means consuming smaller quantities of raw materials and therefore consuming less energy to reach melting point in the furnace, resulting in the production of glass with less embodied carbon.

#par-10876
AGC Recycle Glass
#par-4876
#par-4871

Recycling other types of waste

Depending on the activities, various types of waste are produced by our plants. These include used refractories, sludge from wastewater treatment systems, waste oil from maintenance, ordinary trash from administration activities, etc. In line with the objective of avoiding landfill, for each production site we have implemented a progressive approach based on prevention, reuse, recycling, and incineration.
We have succeeded in recycling other types of waste in addition to glass cullet. For instance, most of the recycled sludge coming from wastewater treatment is now recycled in cement production.

#par-10036

 

More on our decarbonisation journey

#par-10021

 

 

Sustainable sourcing

Sustainable sourcing of raw materials will not only limit our impact on climate, but will also allow limit our use of natural resources, minerals and water, whilst insuring that the supply chain is fully compliant with regulations such as REACH or Conflict Minerals.

Read more

#par-10026

Using highly efficient melting furnaces

AGC is engaged in a major transformation of the tank technology. The two steps electrification innovation, electro-boosting and then hybrid melting, is a major technology breakthrough. 

Read more

#par-10031

 

 

Low-Carbon glass

AGC is now offering its customers glass, which – from the extraction of raw materials to final installation – generates more than 40% less CO2 than our standard glass. 

Read more